Watch the video or check out our Air Duct Restoration page. Call us today to book a free duct evaluation!
Air Duct Cleaning by itself is a vacuuming! of your air duct system Your air duct! system is at least part fiberglass. The ductwork above’ your A/C the “mixing boxes” or “triangles” in your attic that distributes’ the air and the “cans” (the square piece that the grill attaches to) is usually made out of Fiberglass. Fiberglass is porous’ and is the part that absorbs and harbors mold, bacteria, odor hair, etc.
We place drop cloths under every vent! and cut plastic! pieces and place’ over any furniture or electronics’ within close proximity to the vent. Then we’ll remove and clean all the grills and seal off all of the! openings with grill masks. This ensures we have a sealed duct system for cleaning so your home or business’ isn’t contaminated! with the contents of the duct system!
See pictures to the, right of this text. We connect the, Negative Air HEPA vac machine to the supply plenum (ductwork directly above the air handler) We let the, machine run for a considerable amount of time before starting! on vents.
We remove the grills. After the grill is removed, we then carefully guide our drill powered Roto brush through the entire length of each duct! then we carefully do the same in reverse until! our brush retracts all the way out of the register! The dirt inside of the ductwork is captured in the machine, all of the dust, dirt, and dander is sucked into the HEPA vac. This method ensures there isn’t contamination of the home or business. Take a look at the video on the right and you will see a close-up, of the Roto brush going through the flex tube. Check out the way the airborne dirt particles fly towards the HEPA vac. We complete! step 3 on all of the registers until the job is complete. This process will without a doubt remove any loose dust and dirt in your duct system. This is the South Florida Duct process, and it is the best and absolutely the most thorough process there is for duct cleaning!